D-Link DAP-2695 User Guide

80D-Link DAP-2695 User Manual
Web User Interface
Conguration File Upload
This page allows the user to backup and recover the current conguration of the access point in case of a unit failure.
Upload Conguration
File:
After you have a configuration file, click
Choose File. Select the configuration file
and click Open and Upload to update the
conguration.
Download
Conguration File:
Click Download to save the current
configuration file to your local disk. Note
that if you save one conguration le with the
administrator’s password now, after resetting
your Nuclias C onnect AC1750 Dual Band P oE Access P oint
and then updating to this saved conguration
le, the password will be gone.
Upload Nuclias
Connect Network File:
After you have a saved Nuclias Connect le,
click Choose File. Select the saved Nuclias
Connect le and click Open and Upload to
upload the Nuclias Connect le.

D-Link DAP-2695 Specifications

Operating Environment

operating temperature	0˚C to 40˚C
storage temperature	-20˚C to 65˚C
operating humidity	10%~90% (non-condensing)
storage humidity	5%~95% (non-condensing)

Power

operating voltage	48V DC +/- 10% for PoE
voltage and current for PoE	48V/0.5A

Wireless Specifications

wireless frequency range	2.4 to 2.4835 GHz and 5.15 to 5.85 GHz
antenna type at 2.4GHz	3x Detachable 4 dBi Omni antennas
antenna type at 5GHz	3x Detachable 6 dBi Omni antennas

Weight and Dimensions

length	198.8 mm
width	190 mm
height	36.5 mm