77D-Link DAP-2695 User Manual
Web User Interface
SNMP Settings
Console Settings
Status:
Console Protocol:
Time-out:
Status is enabled by default. Uncheck the
box to disable the console.
Select the type of protocol you would
like to use, Telnet or SSH.
Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never.
Status: Check the box to enable the SNMP
functions.
Public Community
String:
Enter the public SNMP community string.
Private Community
String:
Enter the private SNMP community string.
Trap Status: Check the box to enable the trap function.
Trap Server: Enter the trap server IP address.
Ping Control Setting
Status: Check the box to enable the ping control
setting.
To Next Page
Loading...
