D-Link DCS-1130 - Configuration

11D-Link DCS-1130 User Manual
Section 3 - Configuration
Using the Configuration Menu
AftercompletingtheCameraSetupWizard,youarereadytouseyourcamera.Thecamera’sbuilt-inWebconguration
utilityisdesignedtoallowyoutoeasilyaccessandcongureyourDCS-1130.Attheendofthewizard,clickGo To
Camera, or enter the IP address of your camera into a web browser, such as Internet Explorer®. To log in, use the
User name admin and the password you created in the Setup Wizard. If you did not create a password, the default
password is blank. After entering your password, click OK.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the
default IP is 192.168.0.20.