D-Link DCS-1130 User Manual

18D-Link DCS-1130 User Manual
Section 3 - Configuration
If you have a DSL or Cable service provider that changes your modem IP
address periodically, Dynamic DNS (Domain Name Service), a method
of keeping a domain name linked to a dynamic IP address, is useful.
With most Cable and DSL connections, you are assigned a dynamic IP
addressandthataddressisusedonlyforthedurationofthatspecic
connection. With the DCS-1130, you can set up your DDNS service and
the DCS-1130 will automatically update your DDNS server every time it
receives a different IP address. Depending on the service, this update
may take a few hours.
Enable DDNS: Check this checkbox to enable the DDNS function of the
camera.
Server Address: Use the dropdown box on the right to select a DDNS
service.
Host Name: Type in the Host Name of the DDNS service.
User Name: Enter your User Name for the DDNS service.
Password: Enter the password for the DDNS service.
Verify Password:RetypethepasswordfortheDDNSservice.
Timeout: This sets the number of hours between DDNS updates.
After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings
button to discard your changes.
Setup > Dynamic DNS

D-Link DCS-1130 Specifications

General

Brand	D-Link
Model	DCS-1130
Category	Security Camera
Language	English