D-Link DCS-1130 - Setup > Image Setup

19D-Link DCS-1130 User Manual
Section 3 - Configuration
The options in Image Setup allow you to adjust the settings for your IP
camera sensor and image.
Brightness: This adjusts the brightness of the camera image. This is set
to 60 by default.
Saturation: This adjusts the color saturation of the camera image. This
is set to 60 by default.
Contrast: This adjusts the contrast of the camera image. This is set to
0 by default.
Frequency:Thisoptionadjuststhecamerasensor’ssettingtoavoidthe
imageickeringundercertainlightsources,suchasorescentlights.This
is set to 60Hz by default.
White balance: You can change the white balance of the camera image
by selecting a setting from the dropdown box. This is set to Auto by
default.
B/W: Ticking this checkbox will change the camera image into black and
white.
Flip:Thiswilliptheimagevertically.
Mirror:Thiswilliptheimagehorizontallyinsuchawaythatyourleftsidewillbeontheleftsideofthescreenand
vice versa.
Note: Mirror and Flip can be used if you choose to mount the DCS-1130 upside down on the ceiling.
Setup > Image Setup