D-Link DCS-1130 User Manual

24D-Link DCS-1130 User Manual
Section 3 - Configuration
Thisoptionallowsyoutocongurerecordingsettingsandscheduling.
You can record video to a Samba network drive on your local network.
Enable recording: Check this checkbox to enable the recording feature.
After enabling recording, you will need to select a scheduling method.
Samba Auth: Here, select Anonymous if no user name or password is
requiredtoaccessyourSambadrive.Ifyourequireausernameand
password to log in to your Samba drive, select Account andllinthe
following information:
User name: Enter the user name required to access your Samba
drive.
Password:EnterthepasswordrequiredtoaccessyourSambadrive.
Password conrm: Re-enter the password required to access your
Sambadriveforverication.
Server: Enter the name or the IP of the server where your Samba drive
is located.
Shared Folder: Enter the name of your shared folder.
Test: Click this button to make a connection to the Samba network drive, and it will let you know if the settings work.
Note: You can create a simple Samba network drive on your Windows PC by right-clicking a folder, selecting Sharing
and Security…, and selecting Share this folder. Enter a Share name you would like to use for the folder, then click the
Permissions button and check the box for Full Control / Allow for the Everyonegroup.Foryourcamera’sRecording
settings,useAnonymousfortheSambaAuth,yourcomputer’sIPaddressfortheServer,andtheSharenameyou
chose for the Shared Folder. Click on the Test button to test your settings.
Please note that when creating a simple network drive like this, all users on your local network will have access to the
contents of this folder.
Setup > Recording

D-Link DCS-1130 Specifications

General

Brand	D-Link
Model	DCS-1130
Category	Security Camera
Language	English