D-Link DCS-1130 - Appendices; Installing on Router Without UPnP

39D-Link DCS-1130 User Manual
Appendix A - Installing the DCS-1130 on a Router Without UPnP
Appendix A: Installing the DCS-1130 on a Router
Without UPnP
If you connect your camera to an Internet router that does not support
UPnP, you can assign your camera to a DMZ connection on your router.
Formoredetails,refertoyourrouter’sUserManualformoredetailson
conguringyourcameratouseaDMZconnection.
If you have multiple cameras you wish to connect, or if you do not want
to use DMZ, follow these steps to allow multiple remote access to your
cameras:
1) Identify your camera on the network
2) Assign a local IP address and port for your camera
3) Determine your router’s WAN IP Address (Enable Remote
Viewing)
4)Openvirtualserverportsforyourrouter(EnableRemoteViewing)
1) Identify Your Camera on the Network
• Logintoyourcamera’swebinterfacefromacomputeronthesame
local (home) network
• Click on the MAINTENANCE tab, and select Dev ice
Management
• EnterauniqueCamera Name for your camera
Note:Givingyourcameraauniquenameisimportantwhensetting
up multiple cameras on your network.