D-Link DCS-1130 - Page 44

40D-Link DCS-1130 User Manual
Appendix A - Installing the DCS-1130 on a Router Without UPnP
2) Assign an IP Address and Port for Your Camera
• ClickontheSETUP tab, and select Network Setup
AlocalIPaddressisrequiredtocongureyourcameraandtoviewyour
camera within your local network. You may use the default camera IP
addressof192.168.0.20.IfyouwishtouseadifferentIPaddress,be
sure that the camera settings correspond to your network settings. The
Default GatewaywillbetheIPaddressofyourrouter’slocalIPaddress
(e.g.192.168.0.1,ifyouareusingaD-Linkrouter).