D-Link DCS-1130 User Manual

28D-Link DCS-1130 User Manual
Section 3 - Configuration
FTP Server: When checked, the camera will send the snapshots it takes
tothee-mailaddressspeciedinthetextelds.Ifyoudonotknowwhat
information to enter, contact the administrator of the FTP server for
details.
User Name: Enter the User Name of your FTP account.
Password: Enter the Password of your FTP account.
Host Name: Enter the Host Name of your FTP account.
Path:EnterthelepathtothelocationontheFTPserveryouwantto
send snapshots to.
Filename Prex:Entertheprexyouwanttoattachtoyoursnapshot
les.
Port: Enter the port used by the FTP server.
Interval: Enter the time interval the camera will wait before taking a new
snapshot.
Passive Mode:IfyourFTPserverrequiresyoutousepassivemode,
check this box.
Test: Clicking this button will take a snapshot and will try to upload it to
your FTP server using the settings you have entered.
After making any changes, click the Save Settings button to save
your changes, or click the Don’t Save Settings button to discard your
changes.

D-Link DCS-1130 Specifications

General

Brand	D-Link
Model	DCS-1130
Category	Security Camera
Language	English