D-Link DCS-5300 User Manual

38D-Link DCS-5300 User Manual
UPnP is short for Universal Plug and Play, which is a networking architecture that provides compatibility among
networking equipment, software, and peripherals. The DCS-5300 is a UPnP enabled Network Camera. If your operating
system is UPnP enabled, the device will be easier to congure. If you do not want to use the UPnP functionality, it can
be disabled by unselecting “Enable UPnP”.
Click to enable the DDNS function.
Select your Dynamic DNS provider from the pull down menu.
Enter the host name of the DDNS server.
Enter your username or e-mail used to connect to the DDNS server.
Enter your password or key used to connect to the DDNS server.
Enable DDNS:
Provider:
Host name:
Username/E-mail:
Password/Key:
UPnP
Click Apply

D-Link DCS-5300 Specifications

General

Digital zoom	4 x
Maximum frame rate	30 fps
Camera shutter speed	1/60 - 1/15000 s
Minimum illumination	1 lx
Maximum video resolution	320 x 240 pixels
Pan range	270 °
Sensor type	CCD
Product color	Silver
Tilt angle range	-90 - 90 °
Built-in microphone	Yes
Optical sensor size	1/4 \
Focus	2.0
I/O ports	A/V MIC
Power supply type	12VDC 1.5A
Cabling technology	10BaseT, 100BaseT
Supported network protocols	TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP
Compatible operating systems	Microsoft Windows XP, 2000, Me, 98SE
Dimensions (W x D x H) (imperial)	4.1 x 4 x 4.4 \
Minimum system requirements	Internet Explorer 5.x +