43D-Link DCS-5300 User Manual
Click the Motion Detection button from the Conguration screen to access
settings that effect how the DCS-5300 Network Camera can serve as a security
device by recording only when motion is detected.
You may press
to ne-tune the image and see what effect the setting will have on the image. When the image
is acceptable, press to store the image settings, or to recall the original settings. If settings are changed
without saving, they will be used until the next system start-up.
Click the Video button from the Conguration screen to access video settings that affect how the video image
appears.
From this screen you can ne tune the video image.
Image Brightness, Contrast, Saturation and Hue are all adjusted in the same manner. For each video compensation
you can set from among eleven levels ranged from -5 to +5.
Configuration > Advanced > Motion Detection
Click Motion Detection
To Next Page
Loading...
