45D-Link DCS-5300 User Manual
Click the Camera Control button from the Conguration screen to access settings that affect how the DCS-5300
Network Camera can pan and move to preset locations.
Configuration > Advanced > Camera Control
Click Camera Control
Select the speed at which the camera will pan for a full cycle from the pull down menu. Select a value between -5 and
+5, -5 being the slowest setting.
Select the speed at which the camera will tilt for a full cycle from the pull down menu. Select a value between -5 and +5,
-5 being the slowest setting.
Select the speed at which the camera will pan during auto patrol. Select a value between 1 and 5, 1 being the slowest
setting.
Pan Speed:
Tilt Speed:
Auto Pan/Patrol
Speed:
To Next Page
Loading...
