60D-Link DCS-5300 User Manual
Q: What is an Network Camera?
A: The Network Camera is a stand-alone system connecting directly to an Ethernet or Fast Ethernet network. It differs
from a conventional PC Camera, the Network Camera is an all-in-one system with built-in CPU and web-based solutions
providing a low cost solution that can transmit high quality video images for monitoring. The Network Camera can
be managed remotely, accessed and controlled from any PC/Notebook over an Intranet or the Internet from a web
browser.
Q: What is the maximum number of users that can be allowed to access DCS-5300 simultaneously?
A: The maximum number of users that can log onto the Network Camera at the same time is 10. Please keep in mind
the overall performance of the transmission speed will slow down when many users are logged on.
Q: What algorithm is used to compress the digital image?
A: The Network Camera utilizes H.263+ MPEG-4 Short Header Mode image compression technology providing high
quality images. MPEG is a standard for image compression and can be applied to various web browser and application
software without the need to install extra software.
Q: Can I capture still images from the Network Camera?
A: Yes you are able to capture still images with the snapshot function from the software application CD supplied
with the Network Camera.
Q: Can the Network Camera be used outdoors?
A: The Network Camera is not weatherproof. It needs to be equipped with a weatherproof case to be used outdoors
and it is not recommended.
Q: When physically connecting the Network Camera to a network what network cabling is required?
A: The Network Camera uses Category 5 UTP cable allowing 10 Base-T and 100 Base-T networking.
Appendix
Frequently Asked Questions
Network Camera Features
Network Camera Installation
To Next Page
Loading...
Need help?
General
