D-Link DCS-5300

8D-Link DCS-5300 User Manual
After you have successfully completed the hardware installation of the DCS-5300 Network Camera, it is necessary to
install software to congure and operate the camera. The rst step is to install the Installation Wizard program from
the CD. The Installation Wizard will allow you to congure the Network Camera to your network.
After the Installation Wizard software program is completed, you will have an operating and controllable Network
Camera. From your Internet Explorer Web browser you will be able to access the video and sound from the Network
Camera. The camera has a built-in Web server. This Web server will allow the camera to access the Internet without
being attached to a computer and permits users to view the video and audio remotely.
After running the Installation Wizard, you will be able to operate the DCS-5300 and view the camera remotely through
Internet Explorer 6.x and above.
Launching the Installation Wizard program
Insert the CD that is included with the DCS-5300 Network Camera. The DCS-5300 installation menu will start up
automatically from the CD. If the CD Autorun function does not automatically start on your computer, go to Start >
Run. In the run box type “D:\DCS5300.exe” (where D: represents the drive letter of your CD-ROM drive).
Installation Wizard
Click Installation Wizard