D-Link DES-3326S Layer 3 Switch CLI Reference
enable mirror
Purpose Used to enable a previously entered port
mirroring configuration.
Syntax
enable mirror
Description
This command, combined with the disable
mirror command below, allows you to enter a
port mirroring configuration into the Switch, and
then turn the port mirroring on and off without
having to modify the port mirroring configuration.
Parameters None.
Restrictions None.
Example usage:
To enable mirroring configurations:
DES-3326S:4#enable mirror
Command: enable mirror
Success.
DES-3326S:4#
128
To Next Page
Loading...
