D-Link DES-3326S - IGMP Snooping Commands

D-Link DES-3326S Layer 3 Switch CLI Reference
19
IGMP SNOOPING COMMANDS
The Switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
config
igmp_snooping
<vlan_name 32>
all
host_timeout <sec 1-16711450>
router_timeout <sec 1-16711450>
leave_timer <sec 0-16711450>
robustness_variable <value 1-255>
last_member_query_interval <sec 1-25>
state [enable|disable]
config
igmp_snooping
querier
<vlan_name 32>
all
query_interval <sec 1-65535>
max_response_time <sec 1-25>
robustness_variable <value 1-255>
last_member_query_interval <sec 1-25>
state [enable|disable]
config router_ports <vlan_name 32> [add|delete]
<portlist>
enable igmp
snooping
forward_mcrouter_only
show igmp
snooping
vlan <vlan_name 32>
show igmp
snooping group
vlan <vlan_name 32>
show router ports vlan <vlan_name 32>
static
dynamic
Each command is listed, in detail, in the following sections.
151