D-Link DES-3326S - DNS Relay Commands

D-Link DES-3326S Layer 3 Switch CLI Reference
30
DNS RELAY COMMANDS
The DNS relay commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
config dnsr primary
secondary
nameserver <ipaddr>
config dnsr add
delete
static <domain_name>
<ipaddr>
enable dnsr
disable dnsr
enable dnsr cache
disable dnsr cache
enable dnsr static
disable dnsr static
show dnsr static
Each command is listed, in detail, in the following sections.
242