D-Link DES-3326S - Network Management Commands

D-Link DES-3326S Layer 3 Switch CLI Reference
7
NETWORK MANAGEMENT COMMANDS
The network management commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
The DES-3326S supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. You can
specifiy which version of the SNMP you want to use to monitor and control the Switch. The three versions of
SNMP vary in the level of security provided between the management station and the network device. The
following table lists the security features of the three SNMP versions:
SNMP
Version
Authentication Method Description
v1 Community String
Community String is used for
authentication − NoAuthNoPriv
v2c Community String
Community String is used for
authentication − NoAuthNoPriv
v3 Username
Username is used for
authentication − NoAuthNoPriv
v3 MD5 or SHA
Authentication is based on the
HMAC-MD5 or HMAC-SHA
algorithms − AuthNoPriv
v3 MD5 DES or SHA DES
Authentication is based on the
HMAC-MD5 or HMAC-SHA
algorithms − AuthPriv.
DES 56-bit encryption is added
based on the CBC-DES (DES-56)
standard
40