D-Link DES-3326S - Forwarding Database Commands

D-Link DES-3326S Layer 3 Switch CLI Reference
12
FORWARDING DATABASE COMMANDS
The layer 2 forwarding database commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command Parameters
create fdb <vlan_name 32>
<macaddr>
port <port>
create
multicast_fdb
<vlan_name 32>
<macaddr>
config
multicast_fdb
<vlan_name 32>
<macaddr> [add|delete]
<portlist>
config fdb
aging_time
<sec 10-1000000>
delete fdb <vlan_name 32>
<macaddr>
clear fdb vlan <vlan_name 32>
port <port>|all
show multicast_fdb vlan <vlan_name 32>
mac_address <macaddr>
show fdb port <port>
vlan <vlan_name 32>
mac_address <macaddr>
static
aging_time
Each command is listed, in detail, in the following sections.
101