D-Link DES-3326S - Routing Table Commands

D-Link DES-3326S Layer 3 Switch CLI Reference
26
ROUTING TABLE COMMANDS
The routing table commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
create iproute default
<network_address>
<ipaddr>
<metric 1-65535>
primary
backup
delete iproute default
<network_address>
<ipaddr>
show iproute <network_address>
static
rip
ospf
Each command is listed, in detail, in the following sections.
220