D-Link DES-3326S - Page 225

D-Link DES-3326S Layer 3 Switch CLI Reference
clear arptable
Purpose Used to remove all dynamic ARP table entries.
Syntax
clear arptable
Description This command is used to remove dynamic ARP
table entries from the Switch’s ARP table. Static
ARP table entries are not affected.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To remove dynamic entries in the ARP table:
DES-3326S:4#clear arptable
Command: clear arptable
Success.
DES-3326S:4#
219