D-Link DES-3326S Layer 3 Switch CLI Reference
25
ARP COMMANDS
The ARP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command Parameters
create arpentry <ipaddr>
<macaddr>
delete arpentry <ipaddr>
<macaddr>
show arpentry ipif <ipif_name>|ipaddress <ipaddr>|static}
config arp_aging time <value 0-65535>
clear arptable
Each command is listed, in detail, in the following sections.
214
To Next Page
Loading...
