D-Link DES-3326S - Page 221

D-Link DES-3326S Layer 3 Switch CLI Reference
create arpentry
Purpose Used to make a static entry into the ARP table.
Syntax
create arpentry <ipaddr> <macaddr>
Description This command is used to enter an IP address
and the corresponding MAC address into the
Switch’s ARP table.
Parameters
<ipaddr> − The IP address of the end node or
station.
<macaddr> − The MAC address corresponding
to the IP address above.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To create a static arp entry for the IP address 10.48.74.121 and MAC address 00:50:BA:00:07:36:
DES-3326S:4#create arpentry 10.48.74.121 00-50-BA-00-07-36
Command: create arpentry 10.48.74.121 00-50-BA-00-07-36
Success.
DES-3326S:4#
215