D-Link DES-3326S - Page 156

D-Link DES-3326S Layer 3 Switch CLI Reference
show ipif
Purpose Used to display the configuration of an IP
interface on the Switch.
Syntax
show ipif
Description This command will display the configuration of
an IP interface on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display IP interface settings.
DES-3326S:4#show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
IP Address : 10.48.74.122 (MANUAL)
Subnet Mask : 255.0.0.0
VLAN Name : default
Admin. State : Disabled
Link Status : Link UP
Member Ports : 1-26
DES-3326S:4#
150