D-Link DES-3326S - Page 148

D-Link DES-3326S Layer 3 Switch CLI Reference
delete link_aggregation group_id
Purpose Used to delete a previously configured link
aggregation group.
Syntax
delete link_aggregation group_id <value>
Description This command is used to delete a previously
configured link aggregation group.
Parameters
<value> − Specifies the group id. The Switch
allows up to 6 link aggregation groups to be
configured. The group number identifies each of
the groups.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To delete link aggregation group:
DES-3226S:4#delete link_aggregation group_id 6
Command: delete link_aggregation group_id 6
Success.
DES-3226S:4#
142