D-Link DES-3326S - Page 175

D-Link DES-3326S Layer 3 Switch CLI Reference
config 802.1x auth_protocol
Purpose Used to configure 802.1x the authentication
protocol used for RADIUS authenitcation.
Syntax config 802.1x auth_protocol [radius_eap |
radius_pap]
Description The config 802.1x auth_protocol command
allows for a choice of protocol used by the
RADIUS server and client for authentication.
Parameters radius_eap - Instructs the Switch to use
Extensible Authentication Protocol (EAP) used
for RADIUS authentication.
radius_pap - Instructs the Switch to use
Password Authentication Protocol (PAP) used for
RADIUS authentication.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To configure the RADIUS authentication protocol used:
DES-3326S:4# config 802.1x auth_protocol radius_pap
Command: config 802.1x auth_protocol radius_pap
Success.
DES-3326S:4#
169