EasyManua.ls Logo

D-Link DES-3326S - Page 194

D-Link DES-3326S
320 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D-Link DES-3326S Layer 3 Switch CLI Reference
create cpu access_profile
Purpose
Used to create an access profile specifically for CPU Interface Filtering on the
Switch. A CPU access profile defines the parts of each incoming frame’s header the
Switch will examine. Masks can be entered that will be combined with the values the
Switch finds in the specified frame header fields. Specific values for the rules are
entered using the config cpu access_profile command, below. CPU interface
filtering must be enabled to use CPU access profiles (enable cpu_interface_filtering).
Syntax
config cpu access_profile
[ ethernet { vlan | source_mac <macmask> | destination_mac <macmask> |
802.1p | ethernet_type } |
ip { vlan | source_ip_mask <netmask> | destination_ip_mask <netmask> | dscp
| [ icmp { type | code } | igmp { type } | tcp { src_port_mask <hex 0x0-0xffff> |
dst_port_mask <hex 0x0-0xffff> | flag_mask [ all | {urg | ack | psh | rst | syn |
fin } ] } | udp { src_port_mask <hex 0x0-0xffff> |
dst_port_mask <hex 0x0-0xffff> } |
protocol_id {user_mask <hex 0x0-0xffffffff> } ] } ]
{ profile_id <value 1-255> }
Description
The create cpu access_profile command is used to create an access profile used
only for CPU Interface Filtering. Masks can be entered that will be combined with the
values the Switch finds in the specified frame header fields. Specific values for the
rules are entered using the config cpu access_profile command.
Parameters
ethernet Specifies that the Switch will examine the layer 2 part of each packet
header.
vlan Specifies that the Switch will examine the VLAN part of each packet header.
802.1p Specifies that the Switch will examine the 802.1p priority value in the
frame’s header.
source_mac <macmask> Specifies a MAC address mask for the source MAC
address. This mask is entered in a hexadecimal format.
destination_mac <macmask> Specifies a MAC address mask for the destination
MAC address.
ethernet_type Specifies that the Switch will examine the Ethernet type value in each
frame’s header.
188

Other manuals for D-Link DES-3326S

Related product manuals