D-Link DES-3326S - Page 199

D-Link DES-3326S Layer 3 Switch CLI Reference
Example usage:
To configure a cpu access profile:
DES-3326S:4# config cpu access_profile profile_id 101 add access_id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 deny
Command: config cpu access_profile profile_id 101 add access_id 1 ip vlan default source_ip
20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 deny
Success.
DES-3326S:4#
enable cpu_interface_filtering
Used to enable CPU interface filtering on the Switch.
enable cpu_interface_filtering
Description
This command is used, in conjunction with the create and config cpu
access_profile commands, to enable CPU interface filtering on the
Switch. When CPU interface filtering is enabled, the cpu access profile
rules that have been created will be active.
Only administrator-level users can issue this command.
Purpose
Syntax
Parameters None.
Restrictions
DES-3326S:4#enable cpu_interface_filtering
Example Usage:
To enable cpu interface filtering:
Command: enable cpu_interface_filtering
Success.
DES-3326S:4#
193