D-Link DES-3326S - Page 209

D-Link DES-3326S Layer 3 Switch CLI Reference
show stacking
Purpose Used to display the current stacking information.
show stacking {mode}
This command will display the current stacking
information.
Parameters
mode − When specified this will display the
current stacking mode.
none – No specification will display information
for all Switches in the stack. Information
displayed includes MAC address, firmware
version, stacking mode, RPS status and
available port range.
Restrictions None.
Syntax
Description
Example usage:
To display the current stacking (standalone mode) information:
DES-3326S:4#show sta
Command: show stacking
ID MAC Address Port Range Mode Version RPS Status Model Name
--- ----------------- ---------- ---------- -------- ----------- ----------
*1 00-05-5D-1F-5B-A0 1 - 26 STANDALONE 4.01-B27 Present DES-3326S
Total Entries :1
DES-3326S:4#
203