D-Link DES-3326S - Page 236

D-Link DES-3326S Layer 3 Switch CLI Reference
show route redistribute
Purpose Used to display the route redistribution on the
Switch.
Syntax
show route redistribute {dst [rip|ospf]|src
[rip|static|local|ospf]}
Description Displays the current route redistribution settings
on the Switch.
Parameters
src − Allows the selection of the routing protocol
on the source device.
dst − Allows the selection of the routing protocol
on the destination device.
Restrictions None.
Example Usage:
To display route redistributions:
DES-3326S:4#show route redistribute
Command: show route redistribute
Source Destination Type Metric
STATIC RIP All 1
LOCAL OSPF Type-2 20
Protocol Protocol
-------- ------------ -------- --------
Total Entries : 2
DES-3326S:4#
230