D-Link DES-3326S - Page 26

D-Link DES-3326S Layer 3 Switch CLI Reference
show serial_port
Purpose Used to display the current serial port settings.
Syntax
show serial_port
Description This command displays the current serial port
settings.
Parameters none.
Restrictions none
Example Usage:
To display the serial port setting:
DES-3326S:4#show serial_port
Command: show serial_port
Baud Rate : 9600
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DES-3326S:4#
20