D-Link DES-3326S - Page 276

D-Link DES-3326S Layer 3 Switch CLI Reference
show ipmc
Purpose Used to display the IP multicast interface table.
Syntax
show ipmc {ipif <ipif_name>|protocol
[dvmrp|pim]}
Description This command will display the current IP
multicast interface table.
Parameters
<ipif_name> − The name of the IP interface for
which you want to display the IP multicast
interface table for.
protocol [dvmrp|pim] − Allows you to specify
either the DVMRP or PIM protocol to be used in
displaying the IP multicast interface table. For
example, if DVMRP is specified, the table will
display only those entries that are related to the
DVMRP protocol.
Restrictions None.
Usage Example
To display the current IP multicast interface table:
DES-3326S:4#show ipmc
Command: show ipmc
Interface IP Address Multicast Routing
--------------- --------------- -----------------
System 10.90.90.90 INACT
Total Entries: 1
DES-3326S:4#
270