D-Link DES-3326S - Page 278

D-Link DES-3326S Layer 3 Switch CLI Reference
config md5
Purpose Used to enter configure the password for an MD5
key.
Syntax
config md5 key <key_id> <password>
Description This command is used to configure an MD5 key
and password.
Parameters
key <key_id> − The MD5 key ID.
<password> − An MD5 password of up to 16
characters.
Restrictions Only administrator-level users can issue this
command.
Usage Example
To configure an MD5 Key password:
DES-3326S:4#config md5 key 1 dlink
Command: config md5 key 1 dlink
Success.
DES-3326S:4#
272