D-Link DES-3326S - Page 28

D-Link DES-3326S Layer 3 Switch CLI Reference
enable clipaging
Purpose Used to pause the scrolling of the console
screen when the show command displays more
than one page.
Syntax
enable clipaging
Description This command is used when issuing the show
command will cause the console screen to
rapidly scroll through several pages. This
command will cause the console to pause at the
end of each page. The default setting is
enabled.
Parameters none.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To enable pausing of the screen display when show command output reaches the end of the page:
DES-3326S:4#enable clipaging
Command: enable clipaging
Success.
DES-3326S:4#
22