D-Link DES-3326S - Page 289

D-Link DES-3326S Layer 3 Switch CLI Reference
delete ospf area
Purpose Used to delete an OSPF area.
Syntax
delete ospf area <area_id>
Description This command is used to delete an OSPF area.
Parameters
<area_id> − <area_id> − A 32-bit number in the
form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF
domain.
Restrictions Only administrator-level users can issue this
command.
Usage Example:
To delete an OSPF area:
DES-3326S:4#delete ospf area 10.48.74.122
Command: delete ospf area 10.48.74.122
Success.
DES-3326S:4#
283