D-Link DES-3326S - Page 291

D-Link DES-3326S Layer 3 Switch CLI Reference
show ospf area
Purpose Used to display an OSPF area’s configuration.
Syntax
show ospf area {<area_id>}
Description This command will display the current OSPF
area configuration.
Parameters
<area_id> − <area_id> − A 32-bit number in the
form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF
domain.
Restrictions None.
Usage Example
To display an OSPF area’s settings:
DES-3326S:4#show ospf area
Command: show ospf area
Area_id Type Stub Import Summary LSA Stub Default Cost
-------------- ------------- -------------------------------------- ----------------------
0.0.0.0 Normal None None
10.48.74.122 Stub Enabled 1
DES-3326S:4#
Total Entries: 2
285