D-Link DES-3326S - Page 34

D-Link DES-3326S Layer 3 Switch CLI Reference
save
Purpose Used to save changes in the Switch’s
configuration to non-volatile RAM.
Syntax
save
Description This command is used to enter the current
Switch configuration into non-volatile RAM. The
saved Switch configuration will be loaded into
the Switch’s memory each time the Switch is
restarted.
Parameters none.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To save the Switch’s current configuration to non-volatile RAM:
DES-3326S:4#save
Command: save
Saving all settings to NV-RAM... 100%
done.
DES-3326S:4#
28