D-Link DES-3326S - Page 43

D-Link DES-3326S Layer 3 Switch CLI Reference
Example Usage:
To configure the port lock for ports 1:12 – 1:14 to delete the dynamic address table entries on timeout:
DES-3326S:4#config port_security ports 12-14
lock_address_mode DeleteOnTimeout
Command: config port_security ports 12-14 lock_address_mode
DeleteOnTimeout
Success.
DES-3326S:4#
delete port_security_entry
Purpose Used to remove port security from specific devices
according to VLAN and port.
Syntax
delete port_security_entry vlan_name
<vlan_name 32> mac_address <macaddr>
port <port>
Description This allows specific MAC addresses to be excluded
from port locked status for individual ports.
Parameters
<vlan_name 32> − The name of the VLAN on which
the port resides.
<macaddr> − The MAC address that will be removed
from eligibility for locked status.
<port> − The port number corresponding to the MAC
address of the device being removed.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To remove a port eligibility for a specific device:
DES-3326S:4#delete port_security_entry vlan_name default
mac_address a1-01-01-01-01-01 port 4
Command: delete port_security_entry vlan_name default
mac_address A1-01-01-01-01-01 port 1:4
Success
DES-3326S:4#
37