D-Link DES-3326S - Page 59

D-Link DES-3326S Layer 3 Switch CLI Reference
delete snmp community
Purpose Used to remove a specific SNMP community
string from the Switch.
Syntax
delete snmp community <community_string
32>
Description
The delete snmp community command is
used to remove a previously defined SNMP
community string from the Switch.
Parameters
<community_string 32> − An alphanumeric
string of up to 32 characters that is used to
identify members of an SNMP community. This
string is used like a password to give remote
SNMP managers access to MIB objects in the
Switch’s SNMP agent.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To delete the SNMP community string “dlink:”
DES-3326S:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-3326S:4#
53