D-Link DES-3326S - Page 63

D-Link DES-3326S Layer 3 Switch CLI Reference
Example Usage:
To create an SNMP group named “sg1:”
DES-3326S:4#create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view
v1 write_view v1 notify_view v1
Success.
DES-3326S:4#
show snmp engineID
Purpose Used to display the identification of the SNMP
engine on the Switch.
Syntax
show snmp engineID
Description
The show snmp engineID command displays
the identification of the SNMP engine on the
Switch.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To display the current name of the SNMP engine on the Switch:
DES-3326S:4#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 0035636666
DES-3326S:4#
delete snmp group
Purpose Used to remove an SNMP group from the
Switch.
Syntax
delete snmp group <groupname 32>
Description
The delete snmp group command is used to
remove an SNMP group from the Switch.
Parameters
<groupname 32> − An alphanumeric name of
up to 32 characters that will identify the SNMP
group the new SNMP user will be associated
with.
Restrictions Only administrator-level users can issue this
command.
57