D-Link DGS-1510 Series - Page 145

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
142
1-1 NONE
2-1 NONE
SIO Ports:
Port Link Status Hello reply
---- ----------- -----------
1 FALSE 0
2 FALSE 0
3 FALSE 0
4 FALSE 0
5 FALSE 0
6 FALSE 0
<Output truncated>
14-11 debug show cpu utilization
This command is used to display the total CPU utilization and the CPU utilization per process.
debug show cpu utilization
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to display the information about CPU and task utilization.
Example
This example shows how to display the CPU utilization per process information.
Switch#debug show cpu utilization
Five seconds - 12 % One minute - 12 % Five minutes - 12 %
Process Name 5Sec 1Min 5Min
----------------- ------ ------ ------
OS_UTIL 89 % 89 % 89 %
bcmCNTR.0 2 % 2 % 2 %
FAN_Pooling 2 % 2 % 2 %
bcmLINK.0 1 % 1 % 1 %
GBIC_Pooling 1 % 1 % 1 %
bcmL2X.0 1 % 1 % 1 %
HISR1 1 % 1 % 1 %
Switch#