D-Link DGS-1510 Series - Page 354

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
351
Switch# show channel-group channel 3 neighbor
Flag:
S - Port is requesting Slow LACPDUs, F - Port is requesting Fast LACPDUs,
A - Port is in Active mode, P - Port is in Passive mode,
Channel Group 3
Partner Partner Partner Partner
Port System ID PortNo Flags Port_Pri.
-------------------------------------------------------------------
eth1/0/1 32768,00-07-eb-49-5e-80 12 SP 32768
eth1/0/2 32768,00-07-eb-49-5e-80 13 SP 32768
Switch#
This example shows how to display the load balance information for all channel groups.
Switch# show channel-group load-balance
load-balance algorithm: src-dst-mac
Switch#
This example shows how to display the system identifier information.
Switch# show channel-group sys-id
System-ID: 32765,00-02-4b-29-3a-00
Switch#
This example shows how to display the summary information for all port-channels.
Switch# show channel-group
load-balance algorithm: src-dst-mac
system-ID: 32765,00-02-4b-29-3a-00
Group Protocol
------------------------
1 LACP
2 Static
Switch#