D-Link DGS-1510 Series - Page 545

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
542
Parameters
POLICY-NAME
(Optional) Specifies the name of the SSL service policy.
Default
None.
Command Mode
Privileged EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
When the name of the SSL service policy is not specified, all SSL service policies will be displayed.
Example
This example shows how to display all SSL service policies.
Switch# show ssl-service-policy
SSL Policy Name : policy1
Enabled CipherSuites :
RSA_WITH_RC4_128_MD5,
RSA_WITH_3DES_EDE_CBC_SHA,
RSA_EXPORT_WITH_RC4_40_MD5
Session Cache Timeout: 600
Secure Trustpoint : TP1
SSL Policy Name : policy2
Enabled CipherSuites :
RSA_WITH_RC4_128_MD5,
RSA_WITH_3DES_EDE_CBC_SHA,
RSA_EXPORT_WITH_RC4_40_MD5
Session Cache Timeout: 1200
Secure Trustpoint : TP2
Switch#
61-8 ssl-service-policy
This command is used to configure the SSL service policy.
ssl-service-policy POLICY-NAME [ciphersuite [dhe-dss-3des-ede-cbc-sha] [rsa-3des-ede-
cbc-sha] [rsa-rc4-128-sha] [rsa-rc4-128-md5] [rsa-export-rc4-40-md5] | secure-trustpoint
TRUSTPOINT | session-cache-timeout TIME-OUT]
no ssl-service-policy POLICY-NAME [ciphersuite [dhe-dss-3des-ede-cbc-sha] [rsa-3des-ede-
cbc-sha] [rsa-rc4-128-sha] [rsa-rc4-128-md5] [rsa-export-rc4-40-md5] | secure-trustpoint |
session-cache-timeout]
Parameters
POLICY-NAME
Specifies the name of the SSL service policy.
ciphersuite
(Optional) Specifies the cipher suites that should be used by the
secure service when negotiating a connection with a remote peer.