D-Link DGS-1510 Series - Page 624

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
621
show boot [unit UNIT-ID]
Parameters
UNIT-ID
(Optional) Specifies the unit to be displayed.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the boot configuration file and the boot image setting.
Example
This example shows how to display system boot information.
Switch# show boot
Unit 1
Boot image: c:/bootimage.had
Boot config: c:/def_usr.cfg
Unit 2
Boot image: c:/bootimage.had
Boot config: c:/def_usr.cfg
Switch#
70-9 show running-config
This command is used to display the commands in the running configuration file.
show running-config
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
This command displays the current running system configuration.
Example