D-Link DGS-1510 Series - Page 631

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
628
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
System messages can be logged to the local message buffer, local console or remote hosts.
Messages must enter the local message buffer first before it can be further dispatched to logging
server.
The following is a table for the facility.
Numerical code
Facility
0
Kernel messages.
1
User-level messages.
2
Mail system.
3
System daemons.
4
Security/authorization messages.
5
Messages generated internally by the SYSLOG.
6
Line printer sub-system.
7
Network news sub-system.
8
UUCP sub-system.
9
Clock daemon.
10
Security/authorization messages.
11
FTP daemon.
12
NTP subsystem.
13
Log audit.
14
Log alert.
15
Clock daemon (note 2).
16
Local use 0 (local0).
17
Local use 1 (local1).
18
Local use 2 (local2).
19
Local use 3 (local3).
20
Local use 4 (local4).
21
Local use 5 (local5).
22
Local use 6 (local6).
23
Local use 7 (local7).
Example
This example shows how to enable the logging of system messages with a severity higher than
warnings to the remote host 20.3.3.3.
Switch# configure terminal
Switch(config)# logging server 20.3.3.3 severity warnings
Switch(config)#