D-Link DGS-1510 Series - Page 690

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
687
Port Security
Log Description
Severity
Event description: Address full on a port
Log Message: MAC address <macaddr> causes port security violation on
<interface-id>.
Parameters description:
macaddr: The violation MAC address.
interface-id: The interface name.
Warning
Event description: Address full on system
Log Message: Limit on system entry number has been exceeded.
Warning
Safeguard
Log Description
Severity
Event description: the host enters the mode of exhausted.
Log Message: Unit <unit-id>, Safeguard Engine enters EXHAUSTED mode.
Parameters description:
unit-id: The Unit ID
Warning
Event description: the host enters the mode of normal.
Log Message: Unit <unit-id>, Safeguard Engine enters NORMAL mode.
Parameters description:
unit-id: The Unit ID
Informational
SNMP
Log Description
Severity
Event Description: SNMP request received with invalid community string
Log Message: SNMP request received from <ipaddr> with invalid community
string.
Parameters Description:
ipaddr: The IP address.
Informational
SSH
Log Description
Severity
Event description: SSH server is enabled.
Log Message: SSH server is enabled
Informational
Event description: SSH server is disabled.
Log Message: SSH server is disabled
Informational
Stacking
Log Description
Severity
Event description: Hot insertion.
Log Message: Unit: <unitID>, MAC: <macaddr> Hot insertion.
Parameters description:
Informational