122
Frequently Asked Questions (continued)
How can I set up my DI-808HV to work with a DI-804V or DI-804HV Router?
(continued)
Step 12 Select 1 out of the Proposal ID
dropdown menu and click Add To, which
will add the proposal that was just
configured to the IKE Proposal Index.
Click Apply.
Step 13 The device will restart. Click
on the Continue button.
Step 14 Click Back and click on
Select IPSec Proposal.
Step 15 Enter a name for proposal ID
number 1 and select None from the DH
Group drop-down menu.
Step 16 Select ESP as the
Encapsulation Protocol.
To Next Page
Loading...
Need help?
General
