37D-Link DIR-840 User Manual
Section 3 - Setup
If you selected WPA Enterprise security, choose the WPA
mode you would like to use from the drop-down menu:
WPA, WPA2, or Auto (WPA or WPA2).
Choose the cipher type from the drop-down menu.
Set the length of time before the group key is updated.
Enter the amount of time in minutes before EAP
authentication is abandoned.
Enter the IP address of the RADIUS server to connect to for
authentication.
Enter the port used for contacting the RADIUS server.
Enter the shared secret of the RADIUS server.
Click to allow the RADIUS server to verify the devices MAC
address for connection.
WPA Mode
(WPA Enterprise):
Cipher Type:
Group Key Update
Interval:
Authentication
Timeout:
RADIUS Server IP
Address:
RADIUS Server
Port:
RADIUS Server
Shared Secret:
MAC Address
Authentication:
To Next Page
Loading...
