12D-Link DNS-313 User Manual
Section 3 - Configuration
If this is a newly installed hard you are
setting up, choose the New Hard Drive
Install option and click on the Next
button. Follow the steps described in
the “New Hard Drive Install” section on
page 13.
If you are modifying settings on a drive
that has been previously configured,
choose the Modify existing DNS-313
settings option and click on the Next
button. Follow the steps described in
the “Modify Existing DNS-313 Settings”
section on page 18.
If you are attempting to complete an
incomplete installation or need to re-install
the DNS-313, choose the Repair option
and follow the steps described in the
“Repairing a Previously Incomplete
DNS-313 Installation” section on page 20.
The Click n’ Connect options for installation appear in a new menu. Choose the option that suits your purpose:
To Next Page
Loading...
