EasyManua.ls Logo

D-Link DWC-2000 - Net Radvd Pool Delete <Row_Id; Net Routing Dynamic Configure

D-Link DWC-2000
113 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
99
5
prefix_type
Allows the prefix type to be selected as either 6to4
or Global/Local/ISATAP.
ipv6 prefix
type.
6
sla_id
The SLA ID (Site-Level Aggregation Identifier) in
the 6to4 address prefix is set for the interface ID on
which the advertisements are sent.
Unsigned
integer.
7
prefix_address
It specifies the IPv6 network address.
String.
8
prefix_length
The prefix length variable is a decimal value that
indicates the number of contiguous, higher order
bits of the address that make up the network
portion of the address.
Unsigned
integer.
9
prefix_life_time
The length of time over which the requesting router
is allowed to use the prefix.
Unsigned
integer.
7.21 net radvd pool delete <row_id>
S.No
Command Name
Description
Type and Description
1
<row_id>
radvd pool configuration mode.
Unsigned integer.
7.22 net routing dynamic configure
S.No
Command Name
Description
Type and
Description
1
save
Saves dynamic route changes.
2
exit
Saves dynamic routes changes
and exits current mode.
3
cancel
Rolls back RIP configuration
changes.
4
direction
RIP direction none, In only, out
only, both.
RIP direction
5
version
Rip version
RIP version
6
authentication_enable
Enables/disables authentication
for RIP-2B/2M.
Boolean choice.
7
first_key
First MD5 key.
8
first_key id_number
First MD5 key Id.
Unsigned integer.
9
first_key authentication_id
First MD5 Authentication key.
String.
10
first_key valid_from
First MD5 key not valid before
entered date.
11
first_key valid_from
month
Month in which MD5
authentication key validity starts.
Month in the format
MM(01-12)

Table of Contents